Creating FI Cluster

If both FI do have the same firmware, it’s easily to add the Fabric Interconnect B :

 

Enter the configuration method. (console/gui) ? console

Installer has detected the presence of a peer Fabric interconnect. This Fabric interconnect will be added to the cluster. Continue (y/n) ? y

Enter the admin password of the peer Fabric interconnect:xxxxx
Connecting to peer Fabric interconnect… done
Retrieving config from peer Fabric interconnect… done
Peer Fabric interconnect Mgmt0 IP Address: 10.10.61.2
Peer Fabric interconnect Mgmt0 IP Netmask: 255.255.255.0
Cluster IP address : 10.10.61.1

Physical Switch Mgmt0 IPv4 address : 10.10.61.3

Apply and save the configuration (select ‘no’ if you want to re-enter)? (yes/no): yes
Applying configuration. Please wait.

Leave Your Comment

Your email will not be published or shared. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

*